Voltage Transient Surge Suppressor, for use in Alternating Current in Three-Phase Systems of 277-480 Vac.
- SKU MO603
- Categoria Energía / Herramientas > Calidad de la Energía > Supresor de Picos Vca
Electrical work is dangerous, bad connections can cause fires, injuries, or death; electrical installation should only be performed by qualified professionals.
When there is an electrical discharge in the grid, the suppressor will receive the damage. If the discharge is of greater intensity than indicated in the technical sheet and has enough accumulated heat and voltage, the suppressor will open an approximately one-inch hole at the bottom of the canister and expel hot silicon and plastic pieces, performing its maximum blocking function and protecting the circuit.
Use this voltage spike restrictor on alternating current before your three-phase inverter. This will prevent damage due to current spikes caused by unexpected electrical discharges.
*Silicon Oxide Varistor
*Unlimited number of protections.
*Response time 5 nanoseconds
Connect the black wires to the thermal circuit breakers by splicing them with the 3 phases that go to the inverter; connect the white wire to physical ground.
You can also use it in a distribution panel for the protection of electronic equipment.
Electrical work is dangerous, bad connections can cause fires, injuries, or death; electrical installation should only be performed by qualified professionals.
When there is an electrical discharge in the grid, the suppressor will receive the damage. If the discharge is of greater intensity than indicated in the technical sheet and has enough accumulated heat and voltage, the suppressor will open an approximately one-inch hole at the bottom of the canister and expel hot silicon and plastic pieces, performing its maximum blocking function and protecting the circuit.
Use this voltage spike restrictor on alternating current before your three-phase inverter. This will prevent damage due to current spikes caused by unexpected electrical discharges.
*Silicon Oxide Varistor
*Unlimited number of protections.
*Response time 5 nanoseconds
Connect the black wires to the thermal circuit breakers by splicing them with the 3 phases that go to the inverter; connect the white wire to physical ground.
You can also use it in a distribution panel for the protection of electronic equipment.
